When it comes time to clean your AEM DryFlow air filter you'll want to have one of these AEM DryFlow air filter cleaning kits on hand.

The cleaning solution helps to unlock the dirt and grime embedded in the filter and bring it back to new condition, giving you thousands and thousands of miles of trouble free performance.

Remove filter from intake pipe and set the filter clamp aside. Fill a pail with warm clean water deep enough to submerge the filter completely. Add one bottle of AEM Filter cleaning solution to the water. Without allowing the solution to flow into the filter neck, submerge the filter into the water and let it soak for 10 minutes. After soaking, rotate the filter back and forth to agitate the water and knock off dirt. Empty the bucket of dirty water. Repeat steps 3 and 4. (Both solution bottles will be used for one cleaning cycle) Refill the pail with clean warm water and rinse by rotating the filter in the bucket. The water should be clear with no signs of dirt in the pail. Allow the filter to air dry. DO NOT APPLY ANY OIL TO THIS FILTER. Re-install the filter on the intake system once it is dry.