Streetglow Neon Pedals : A new comer to StreetGlow's extensive line of Auto-Neon® accessories. Streetglow Neon Pedals are nothing short of innovative. Precision machined EL Neon Racing Pedals capture the excitement of neon with a stylish racing look all in one. Looks great turned on or off! Available for both automatic and manual vehicles. Each Streetglow Neon Pedal is available in nine exotic colors and a brilliant chrome finish This product will fit most, but may not fit all factory pedals.

---

Blue and red pedals are also available in a Satin finish.
Blue and Red Pedals are no longer available in black edges. They are still available in Chrome or Satin edge.

Click the thumbnail for an enlarged image of the white pedals in action!

Instructions for Streetglow Neon Pedals. Installation time: 1 hour.

1. Start with either pedal. Using Allen wrench, loosen all four allen screws on pedal pads.

2. Make sure to fasten “L” brackets over existing pedals and tighten all four allen screws. Check to make sure pedals are secure.“L” bracket should be firmly clamped to back of pedal.

3. After securing and fastening pedal make sure to check for any movement or loose “L” brackets. Pedal should appear level and flush with all allen screws tightly secured. Before Driving! Apply pressure to pedal pads with foot to insure that all the screws are tightened properly. Repeat steps for remaining pedals.

Wiring

Step 1: Connect Female parts of connector from pedals with Male parts of connector from transformer.

Step 2: Connect Black(-)wire to Ground, and Black wire with White stripe(+) 12V to the Fused Power Source.*

Step 3: Tie any excess or loose wires together with black wire ties (Included) to avoid any possible disturbance while driving.

Step 4: Mount Brightness Control Switch in a place where it is convenient and easy to reach.

Step 5: Mount transformer beneath your dashboard and away from any moving parts.

Step 6: Secure and fasten any power wires running from pedals to transformer with black electrical tape or wire ties.